2022年07月24日 06:20
26. Stern – The back part of the boat. 27. Swim platform – A structure fixed to the transom or aft portion of the boat designed to make getting onto the boat from the water or dock easier.
6 ) Ships Hull It includes the key parts of the ship such as bow, deck, the bottom keel and the both sides of the ship.
Hull. A ship's hull is the most crucial as well as the most visible section of the vessel. It is the main body of the ship and helps keep water out of the vessel. The hull makes sure the ship's cargo and machinery are well protected and free from any form of damage.
Openings in the outside of the ship are ports, not windows. Entrances from one compartment to another are called doors. Openings from one deck to another are called hatches. The handles on the watertight hatch or door are called dogs. When you close a door or watertight hatch, you secure it.
Description. The stem is the curved edge stretching from the keel below, up to the gunwale of the boat. It is part of the physical structure of a wooden boat or ship that gives it strength at the critical section of the structure, bringing together the port and starboard side planks of the hull.
The hull is the body of a vessel, without taking into account the rigging (ropes, chains, and tackle used to support and work masts, sails, etc.). The structure of the hull is composed of several different parts that will be discussed next.
The left side is called 'port' because ships with steerboards or star boards would dock at ports on the opposite side of the steerboard or star. As the right side was the steerboard side or star board side, the left side was the port side.
The difference between "aft" and "stern" is that aft is the inside (on board) rearmost part of the vessel, while stern refers to the outside (offboard) rearmost part of the vessel. The stern is opposite the bow, the outside (offboard) of the front of the boat.
The rope that runs up the mast to pull up the mainsail is called the halyard and to bring the sail down the line is called the downhaul. The lines that are used when sailing are called sheets and each sheet will refer to the sail that it controls.
The vertical section at the rear of the boat is known as the transom. In most modern saltwater fiberglass boats, the transom can house single or multiple outboard motors.